Application of Rack & Pinion pneumatic actuator in continuous water supply system

Nowadays, Rack & Pinion  pneumatic actuators  are widely used in many places, especially in some systems, such as continuous water supply systems. Let's learn about the application of Rack & Pinion Pneumatic Actuators in continuous water supply systems.

Choosing Pneumatic Actuators is correct. In general, the water supply system is in a humid environment, and the internal components of electric actuators may corrode, burn out, and cause water supply failures. In severe cases, electric sparks may even be generated inside the electric actuators, and explosions may occur.

As for using pneumatic actuators, the first thing to consider is the function you need to achieve. If you need to reset the actuator after a power outage, you should choose a single action spring reset type pneumatic actuator; If the original position can be maintained after power failure, then choose a dual action pneumatic actuator. At the same time, if equipped with a gas storage tank, it is more convenient to use a dual action pneumatic actuator, which can still complete one cycle control after power failure.
After selecting the actuator, it depends on how to control it specifically. Firstly, it is recommended to configure a three position five way Solenoid Valve to control the airflow and achieve control of the pneumatic actuator by controlling the Solenoid Valve

After reading the above content, I believe everyone already knows the application of Rack & Pinion  pneumatic actuators  in continuous water supply systems.