Kala soocida Alaabada

Qalabka korantada ee taxanaha ah ee BNE waxaa loo isticmaalaa in lagu xakameeyo 0-270 ° waalka rotary, sida waalka balanbaalista, valve valve, ceejinta, valves baffle, valves fur, iwm. , saldhigyada korontada, sahayda kulaylka, qalabaynta dhismaha, warshadaha iftiinka iwm. booska loo baahan yahay, garwaaqso xakamaynta otomaatiga. Wareegga wax soo saarka ugu badan waa 1500 Nm

Taxanaha TBNⅡ iyo actuator pneumatic pneumatic waxaa kaxeeya hawo ciriiri ah, dhaqdhaqaaqa toosan ee rack piston wuxuu wadaa gudbinta qalabka wax soo saarka, iyo actuator pneumatic waxaa soo saaraya istaroogga xagasha. Waxa jira noocyo laba-jilid ah iyo kuwa hal-jilaa ah, kuwaas oo si weyn loogu isticmaalo beddelka iyo hagaajinta valves-ka rubuc-wareegga ah sida valves-ka kubbadda, balaaliyeyaasha, iyo valves-ka, waxaana sidoo kale loo isticmaali karaa xilliyo kale oo wareeg ah.

Qaabka: TBNS052-TBNS400DA / SR, 16 moodooyinka, walxaha 304ss ama 316ss, wax soo saarka 20N.m ~ 8120N.m ee sahayda hawada 5bar, ISO5211 / DIN3337 si ay u dhigmaan isku xirka valve, Namur interface ee qalabka, ± 5 ° hagaajinta, Shahaadada ATEX

Dhaqdhaqaaqa sambabada birta ah ee birta ah ee TBNS waxaa ku shaqeeya hawo cufan, iyada oo loo marayo dhaqdhaqaaqa toosan ee rack piston waxa uu wadaa shafka wax soo saarka marsho, ilaa xagal wax soo saarka pneumatic actumatic. Action double iyo hal nooc, oo si weyn loogu dabaqi karo kubbadda kubbadda, beddelka waalka balanbaalista, fur waalka isometric istaroogga ee waalka iyo hagaajinta, sidoo kale waxaa loo isticmaali karaa waqtiyo kale oo wareeg ah, waa in la xaqiijiyo aaladda ugu habboon ee xakameynta iswada ee dhuumaha warshadaha.

Qaabka: TBN032-TBN400DA / SR, moodooyinka 17, aluminium oo leh jir adag oo anodized ah, qulqulka wax soo saarka 7.4-8033Nm at 5 bar sahayda hawada, ISO5211 / DIN3337 si ay u dhigmaan xiriirka valve, Namur interface ee qalabka, ± 5 ° hagaajinta, oo leh CE / Shahaadada ATEX

Model: Naqshad moodeel ah, jirka la farsameeyay, ISO5211, NAMUR VDI/VDE 3845 ee loogu talagalay dhejinta agabka, qulqulka wax soo saarka 1111N.m ~ 100000N.m, nooca jilitaanka double, nooca soo celinta guga. Nooca harqood ee simmetrical ah ama harqood qasan ayaa diyaar ah.

Dhaqdhaqaaqayaasha taxanaha BP waxay qaataan naqshadaynta farsamada harqood ee qadiimiga ah, kaas oo soo saari kara qulqulka ugu badan ee labada daraf ee istaroogga, oo ay diyaar u yihiin Ball Valves, Valves Balanbaal, Plug Valves iyo dhammaan 90 ° valves wareega, oo si ballaaran loogu dabaqi karo warshadaha kiimikada, cuntada & cabitaanka, biraha, goobta badda, dawooyinka, tamarta, waraaqaha, dunta iyo warshadaha kale.

Qalabka Electro-Pneumatic Positioner YT-1000 waxaa loo isticmaalaa hawlgalka rotary ama toosan valve actuator iyadoo la adeegsanayo kontoroolka korantada ee nidaamyada kontoroolka leh calaamad wax soo saarka analooga ah ee DC 4 ilaa 20mA ama kala qaybsanaan.

• Ma jiro wax dhawaaq ah 5-200Hz.

• Isbeddelka jilitaanka RA/DA waa mid ku habboon.waxa ay awood u leedahay in ay dalbato hal ama laba jilaa.

• Waa suurtagal in laga hortago ugaarsiga iyada oo la adeegsanayo jilbaha cabbirka yar.

Waa dhaqaale sababtoo ah isticmaalka hawada oo yar.

• Waxa ay awood u leedahay in ay xakamayso 1/2 kala qaybsanaanta kala qaybsanaanta oo leh qalliin fudud oo qaybo beddel ah.

Sida qayb weyn oo ka mid ah nidaamka xakamaynta otomaatiga, buug-gacmeedka taxanaha KH ayaa si weyn loo adeegsadaa hawl-wadeennada sambabada oo la isku daray. Waxaa inta badan loo isticmaalaa 90° rotary ON/OFF, sida balabaaliga waalka, waalka kubbadda, waalka fur. Buug-gudbinta buug-gacmeedku waxa ay suurtogal ka dhigaysaa in gacanta lagu shaqeeyo marka dhuumuhu hawada xumaadaan.

Astaamaha

Xoog-sare, xoog badan

Cimilada ceymiska: IP65

Halbeegga saldhigga kor u qaadista: ISO5211KH TAXANAHA BUUGGA GURIGA

Model: BN002-BN150, 9 model, torque wax soo saarka 18Nm ~ 1500N.m, nooca dhaqaalaha, guryaha daawaha aluminium la epoxy dahaarka, ON / OFF nooca, Modulating nooca, ISO5211, oo leh shahaado CE.

Model: BQ600,13 model, torque wax soo saarka 60Nm ~ 6000N.m, guryaha daawaha aluminium la epoxy dahaarka ah, ON / Off nooca, Modulating nooca, ISO5211, Qarax caddayn EXDIIBT4 doorasho, la shahaado CE.

Sanduuqa Xaddidaadda Taxanaha APL waa xidhid cufan, ceymis cimileed leh oo leh furaha booska gudaha lagu hagaajin karo iyo tilmaam muuqaal dibadda ah. Waxay leedahay NAMUR jaangooyooyin ku dhejinta iyo wadista, waxayna ku habboon tahay ku-kordhinta ilaa rubuc-wareegayaasha iyo furayaasha.

APL Series Limit Switches wuxuu leeyahay:

• Naqshad adag oo cufan aluminium guri dhinta-kabka ah oo leh dhammays dahaaran oo budada polyesterka ah.

Tusiyaha Booska Muuqaalka ee Bolt-on.

• Kaamirada kabista gu' raran ee "Dhakhso-Dejinta" Looma baahna in dib loo hagaajiyo ka dib dejinta bilowga. Dejinta fudud oo aan qalab lahayn.

• Gelida laba fiilooyinka.

• Dabooladaha daboolan si looga hortago luminta marka daboolka la saaro.

• NAMUR caadiga ah usheeda dhexe ee birta ahama.

Tilmaam:

- Sifooyin sharciyeed sare.

– Dhisme raf ah oo u adkaysta daxalka

- Degganaansho heer sare ah iyo dib u soo celin.

– Is-xilqaan.

- Hoos u dhaca socodka sare.

- Intergral, filter is nadiifinta.

- Dhowr ikhtiyaar oo kor u kaca.

ACTION: Electromagnet ama buug-gacmeedka, riix oo wareeji slider-ka si aad u rumowdo qufulka gacanta ee gacanta.

Habka dib-u-habaynta: Soo celinta guga pneumatic, soo celinta guga farsamada, soo celinta hawlgalka elektromagnet.

Isku xirka: ISO228/1 ama G1/4

Heerkulka shaqada: -20℃～+60℃

Qalabka: Jirka waalka iyo qaybaha gudaha: aluminium aluminium anodized, copper. Dabool: xoojinta caagagga. Giraanta daboolida: styrenebutadiene caag (NBR) iyo polyurethane (AU).

Buur: Waa waafaqsan heerka NAMUR iyo VDI/VDE3845 godad labanlaab ah.

Cadaadis koronto: 24VDC, 24V/110V/220VAC, 6V～110VDC, 12V～254VAC, 50 ama 60Hz

Eexda korantada: ± 10% heerka iyo qaraxa-cadaynta (Exd Ⅱ BT4) gariiradda caadiga ah: Awood AC lix VA, awood bilow deggan

ACTION: Electromagnet ama buug-gacmeedka, riix oo wareeji slider-ka si aad u rumowdo qufulka gacanta ee gacanta.

Habka dib-u-habaynta: Soo celinta guga pneumatic, soo celinta guga farsamada, soo celinta hawlgalka elektromagnet.

Isku xirka: ISO228/1 ama G1/4

Heerkulka shaqada: -20℃～+60℃

Qalabka: Jirka waalka iyo qaybaha gudaha: aluminium aluminium anodized, copper. Dabool: xoojinta caagagga. Giraanta daboolida: styrenebutadiene caag (NBR) iyo polyurethane (AU).

Buur: Waa waafaqsan heerka NAMUR iyo VDI/VDE3845 godad labanlaab ah.

Cadaadis koronto: 24VDC, 24V/110V/220VAC, 6V～110VDC, 12V～254VAC, 50 ama 60Hz

Eexda korantada: ± 10% heerka iyo qaraxa-cadaynta (Exd Ⅱ BT4) gariiradda caadiga ah: Awood AC lix VA, awood bilow deggan

Awood 4.3 VA (xaalad kulul) DC2.6 W (xaalad kulul), 3 W (xaalad qabow)

Adabtarka dhimista xiddigta/ adabtarada labajibbaaran, WCB, 304ss, 316ss walxo

1. 11mm (Xiddiga Dibadda)×9mm(Square Inside)×12mm (dhererka)

2. 14mm (Xiddiga Dibadda)×9mm(Square Inside)×15mm (dhererka)

3. 14mm (Xiddiga Dibadda) × 11mm (Square Inside) × 16mm (dherer)

4. 17mm (Xiddiga Dibeddiisa)×11mm(Square Inside)×19mm (dhererka)

5. 17mm (Xiddiga ka baxsan)×14mm(Square Inside)×17mm (dhererka)

6. 19mm (Xiddiga Dibadda) × 11mm (Square Inside) × 21mm (dherer)

7. 19mm (Xiddiga ka baxsan)×14mm(Square Inside)×21mm (dhererka)

8. 19mm (Xiddiga ka baxsan)×17mm(Square Inside)×21mm (dhererka)

9. 22mm (Xiddiga ka baxsan)×14mm(Square Inside)×20mm (dhererka)

10. 22mm (Xiddiga ka baxsan)×17mm(Square Inside)×24mm (dhererka)

11. 22mm (Xiddiga Dibadda)×19mm(Square Inside)×20mm (dhererka)

12. 27mm (Xiddiga Dibadda)×17mm(Square Inside)×29mm (dhererka)

13. 27mm (Xiddiga Dibadda)×19mm(Square Inside)×29mm (dhererka)

14. 27mm (Xiddiga ka baxsan)×22mm(Square Inside)×29mm (dhererka)

15. 36mm (Xiddiga Dibadda)×19mm(Square Inside)×29mm (dhererka)

16. 36mm (Xiddiga Dibadda)×22mm(Square Inside)×38mm (dhererka)

17. 36mm (Xiddiga Dibadda)×27mm(Square Inside)×38mm (dhererka)