UKUHLUKANISWA KOMKHIQIZO

I-TBNⅡ rack yochungechunge kanye ne-pinion pneumatic actuator iqhutshwa umoya ocindezelwe, ukunyakaza okuqondile kwe-piston rack kushayela ukuhanjiswa kwegiya kwe-shaft ephumayo, futhi i-actuator yomoya ikhishwa yi-angular stroke. Kunezinhlobo ezisebenza kabili nezisebenza kanye, ezisetshenziswa kakhulu ekushintsheni nasekulungiseni ama-valve e-quarter-turn njengama-valve ebhola, ama-butterfly valves, nama-plug valves, futhi angasetshenziswa kwezinye izikhathi ezijikelezayo.

Imodeli: TBNS052-TBNS210DA/SR, 8 amamodeli, 304ss noma 316ss, torque okukhipha 20N.m ~ 1330N.m at 5bar air supply, ISO5211/DIN3337 ukufanisa uxhumano valve, Namur interface for izesekeli, ±5° ukulungiswa, kanye Isitifiketi se-ATEX.

I-TBNS Series stainless steel pneumatic actuator inikwa amandla wumoya ocindezelwe, ngokunyakaza okulandelanayo kwe-piston rack ishayela i-shaft ephumayo yegiya, ukuze i-engeli ephumayo i-pneumatic actuators. Isenzo esiphindwe kabili kanye nohlobo olulodwa lwesenzo, olusebenza kakhulu ku-valve yebhola, iswishi ye-butterfly valve, i-plug valve isometric stroke ye-valve nokulungiswa, kungasetshenziswa futhi kwezinye izikhathi zokujikeleza, iwukubona idivayisi efanelekile yokulawula amapayipi embonini.

Imodeli: I-TBN032-TBN400DA/SR, amamodeli angu-17, i-aluminium enomzimba oqinile we-anodized, i-torque engu-7.4-8033Nm ku-5 bar air supply, ISO5211/DIN3337 ukufanisa uxhumano lwe-valve, i-Namur interface yezesekeli, ± 5 ° ukulungiswa, ne-CE/ Isitifiketi se-ATEX.

Imodeli: Idizayini ye-modular, umzimba owenziwe, i-ISO5211, i-NAMUR VDI/VDE 3845 yokufakwa kwezinsiza, i-torque ephumayo 1111N.m ~ 100000N.m, uhlobo olubambekayo oluphindwe kabili, uhlobo lokubuya kwentwasahlobo. I-Symmetric noma uhlobo lwejoka e-canted luyatholakala.

Ama-activator ochungechunge lwe-BP asebenzisa umklamo we-classical wejoka we-scotch, ongakhipha i-torque ephezulu kuzo zombili iziphetho ze-stroke, etholakala kuma-Ball Valves, ama-Butterfly Valves, ama-Plug Valves nawo wonke ama-valve ajikelezayo angu-90°, asebenza kabanzi embonini yamakhemikhali, ukudla & isiphuzo, i-metallurgy, iplatifomu yasogwini, ezemithi, amandla, amaphepha, izindwangu nezinye izimboni.

Imodeli: Amamodeli e-BQ600,13, i-torque engu-60Nm ~ 6000N.m, i-aluminium alloy yezindlu ene-epoxy coated, uhlobo lwe-ON/OFF, uhlobo lwe-Modulating, i-ISO5211, ubufakazi bokuqhuma i-EXDIIBT4 ngenketho, nesitifiketi se-CE.

Imodeli: BN002-BN150, amamodeli angu-9, i-torque engu-18Nm ~ 1500N.m, uhlobo lwezomnotho, izindlu ze-aluminium alloy ezine-epoxy coated, uhlobo lwe-ON / OFF, uhlobo lwe-Modulating, i-ISO5211, nesitifiketi se-CE.

I-Electro-Pneumatic Positioner YT-1000 isetshenziselwa ukusebenza kwe-pneumatic rotary noma i-linear valve actuator ngokusebenzisa isilawuli sikagesi sezinhlelo zokulawula ezinesignali yokuphuma kwe-analog ye-DC 4 kuya ku-20mA noma amabanga ahlukene.

• Akukho ukukhala kokungu-5-200Hz.

• Ukushintsha kokusebenza kwe-RA/DA kulula.iyakwazi ukufaka isicelo ku-activator eyodwa noma ekabili.

• Kungenzeka ukuvimbela ukuzingela nge-orifice ku-actuator yosayizi omncane.

• Iyonga ngenxa yokusebenzisa umoya omncane.

• Iyakwazi ukulawula uhla lokuhlukaniswa okungu-1/2 ngokusebenza okulula ngokushintsha izingxenye.

Njengengxenye enkulu yesistimu yokulawula okuzenzakalelayo, ukubhala ngaphezulu kochungechunge lwe-KH kusetshenziswa kakhulu nama-actuator womoya ngokuhlangene. Isetshenziswa kakhulu ku-90° rotary ON/OFF valve, njenge-valve uvemvane, i-valve yebhola, i-valve yepulaki. Ukukhipha okwenziwa ngesandla kwenza kube nokwenzeka ukusebenza mathupha lapho ipayipi lihluleka komoya.

Izici

Amandla aphezulu, itorque ephezulu

I-Weatherproof: IP65

Ukukhwezwa okuyisisekelo okujwayelekile: UKUGQIBELA KWE-ISO5211KH SERIES MANUAL

I-APL Series Limit Switch Box iyindawo evalekile, enobufakazi besimo sezulu enokushintshwa kwendawo okulungisekayo kwangaphakathi kanye nenkomba yangaphandle ebonakalayo. Inokufakwa kanye nokushayela okujwayelekile kwe-NAMUR, futhi ifaneleka kahle ukukhwezwa kuma-actuator namavalvu okujika kwekota.

Izici ze-APL Series Limit Switches:

• Umklamo oqinile futhi ohlangene wendlu ye-aluminium die-cast ene-polyester powder coated finish.

• Inkomba Yendawo Ebonakalayo Yebhontshisi.

• “Isetha Ngokushesha” ikhamera ehlutshiwe elayishiwe entwasahlobo. Asikho isidingo sokulungisa futhi ngemva kokusetha kokuqala. Ukusetha okulula ngaphandle kwamathuluzi.

• Okufakiwe kwamakhebula amabili.

• Amabhawodi okukhava okuthunjiwe ukuvikela ukulahleka lapho ikhava isuswa.

• I-NAMUR standard shaft yensimbi engagqwali kanye nebakaki.

Isici:

-Izici zokulawula eziphezulu.

– Ukwakhiwa okumangelengele nokungagqwali

- Ukuzinza okuhle kakhulu nokuphindaphinda.

– Ukuzikhulula.

- Ukwehla okuphansi ekugelezeni okuphezulu.

-I-Intergral, isihlungi sokuhlanza ngokwakho.

- Izinketho zokufaka eziningana.

ISENZO: I-Electromagnet noma imanuwali, cindezela bese uzungezisa isilayidi ukuze ubone ukukhiya kwesimo okwenziwa ngesandla.

Setha kabusha indlela: Ukubuya kwentwasahlobo ye-pneumatic, ukubuya kwentwasahlobo ngomshini, ukubuyiselwa kokusebenza kuka-electromagnetic.

Ukuxhuma: ISO228/1 noma G1/4

Izinga Lokushisa Lokusebenza: -20℃℃+60℃

Material: Umzimba we-valve nezingxenye zangaphakathi: i-anodized aluminium alloy, ithusi.Isembozo: ipulasitiki eqinisayo. Indandatho yokuvala: irabha ye-styrenebutadiene (NBR) kanye ne-polyurethane (AU).

ukukhweza: Ngokuvumelana ne-NAMUR ejwayelekile kanye nezimbobo eziphindwe kabili ze-VDI/VDE3845.

Ingcindezi kagesi: 24VDC, 24V/110V/220VAC, 6V～110VDC, 12V～254VAC, 50or60Hz

Ukuchema kwe-voltage: ±10% okujwayelekile kanye nokuvikela ukuqhuma (Exd Ⅱ BT4) ikhoyili evamile yekhoyili: Amandla e-AC ayisithupha VA, amandla okuqala azinzile

ISENZO: I-Electromagnet noma imanuwali, cindezela bese uzungezisa isilayidi ukuze ubone ukukhiya kwesimo okwenziwa ngesandla.

Setha kabusha indlela: Ukubuya kwentwasahlobo ye-pneumatic, ukubuya kwentwasahlobo ngomshini, ukubuyiselwa kokusebenza kuka-electromagnetic.

Ukuxhuma: ISO228/1 noma G1/4

Izinga Lokushisa Lokusebenza: -20℃～+60℃

Material: Umzimba we-valve nezingxenye zangaphakathi: i-anodized aluminium alloy, ithusi.Isembozo: ipulasitiki eqinisayo. Indandatho yokuvala: irabha ye-styrenebutadiene (NBR) kanye ne-polyurethane (AU).

ukukhweza: Ngokuvumelana ne-NAMUR ejwayelekile kanye nezimbobo eziphindwe kabili ze-VDI/VDE3845.

Ingcindezi kagesi: 24VDC, 24V/110V/220VAC, 6V～110VDC, 12V～254VAC, 50or60Hz

Ukuchema kwe-voltage: ±10% okujwayelekile kanye nokuvikela ukuqhuma (Exd Ⅱ BT4) ikhoyili evamile yekhoyili: Amandla e-AC ayisithupha VA, amandla okuqala azinzile

Amandla 4.3 VA (isimo esishisayo) DC2.6 W (isimo esishisayo), 3 W (isimo esibandayo)

I-adaptha yokunciphisa inkanyezi/i-adaptha yesikwele, i-WCB, 304ss, 316ss impahla

1. 11mm(Inkanyezi Ngaphandle)×9mm(Isikwele Ngaphakathi)×12mm(ubude)

2. 14mm(Inkanyezi Ngaphandle)×9mm(Isikwele Ngaphakathi)×15mm(ubude)

3. 14mm(Inkanyezi Ngaphandle)×11mm(Isikwele Ngaphakathi)×16mm(ubude)

4. 17mm(Inkanyezi Ngaphandle)×11mm(Isikwele Ngaphakathi)×19mm(ubude)

5. 17mm(Inkanyezi Ngaphandle)×14mm(Isikwele Ngaphakathi)×17mm(ubude)

6. 19mm(Inkanyezi Ngaphandle)×11mm(Isikwele Ngaphakathi)×21mm(ubude)

7. 19mm(Inkanyezi Ngaphandle)×14mm(Isikwele Ngaphakathi)×21mm(ubude)

8. 19mm(Inkanyezi Ngaphandle)×17mm(Isikwele Ngaphakathi)×21mm(ubude)

9. 22mm(Inkanyezi Ngaphandle)×14mm(Isikwele Ngaphakathi)×20mm(ubude)

10. 22mm(Inkanyezi Ngaphandle)×17mm(Isikwele Ngaphakathi)×24mm(ubude)

11. 22mm(Inkanyezi Ngaphandle)×19mm(Isikwele Ngaphakathi)×20mm(ubude)

12. 27mm(Inkanyezi Ngaphandle)×17mm(Isikwele Ngaphakathi)×29mm(ubude)

13. 27mm(Inkanyezi Ngaphandle)×19mm(Isikwele Ngaphakathi)×29mm(ubude)

14. 27mm(Inkanyezi Ngaphandle)×22mm(Isikwele Ngaphakathi)×29mm(ubude)

15. 36mm(Inkanyezi Ngaphandle)×19mm(Isikwele Ngaphakathi)×29mm(ubude)

16. 36mm(Inkanyezi Ngaphandle)×22mm(Isikwele Ngaphakathi)×38mm(ubude)

17. 36mm(Inkanyezi Ngaphandle)×27mm(Isikwele Ngaphakathi)×38mm(ubude)